|
|
|
BFC31306 Moma and Baby Lemur Pocket topper
I saw the photo of the little baby hanging on to his Moma's fur and I fell in love. I also love Lemurs for their briliant contrasting colors. They can make a real fashion statement! And of course that is in addition to being soooo cute. The tail is optional of course, but there is a really easy way to add it. Making the tail was a bit of a adventure. I had the adorable picture of the Moma's head with the baby on top, but no tail! Drawing the tail wasn't a problem, but what size to make it? So I studied a whole bunch of lemur photos and some text sites and with a dash of Math came up with the right proportion. LOL
You will receive both designs in the size you choose and full instructions.
1 Design 3 sizes MLJ
| Medium | Large | Jumbo |
 |  |  |
| Medium | Large | Jumbo |
 |  |  |
All of our machine embroidery designs will come in any or all of the following hoop sizes: (You will receive links to download the size(s) you purchased and all formats available)
Small for 4 x 4 inch hoop, Medium for 5 x 7 inch hoop, Large for 6 x 10 inch hoop, and Jumbo 8 x 12 inch hoop.
Each design description above will state the sizes the design comes in: S, M, L, J standing for Small, Medium, Large and Jumbo. These will be written SML, meaning Small, Medium and Large, or perhaps MLJ, meaning Medium Large and Jumbo, or even SMLJ meaning the design comes in all four hoop sizes
Formats Available:ART4, DST, EXP, HUS, JEF, JEF+(inside JEF download) PES, VIP, VP3(inside VIP download) XXX
If your format is not listed email us.
Product questions
-
Sep 14, 2018, 05:00 PM
Part 2 of the first question, skunk with a TAIL... lol
Sep 14, 2018, 05:07 PMOh definitely!!!!!!! LOL LOL
Thank you Margo - Suz -
Sep 8, 2018, 08:06 AM
I love the tail. It is so very cute. I would like to have the tail with a cat pocket topper. Would it be possible to add the a tail to the cat pocket topper. Thank you.
Sep 8, 2018, 09:07 AMHi Sheri! Thank you! I will be doing more cats and I'll be sure to add a tail to some. I'll look at making the tail a single or make the next tail a single.
Thanks again,
Suz -
Sep 7, 2018, 12:53 PM
What size did you use for your shirt? I just measured a denim shirt and it seems like the
the pocket top opening is only 4 inches.The problem is I would like the longer tail. I love this design, make more like this. Shirley TwineSep 7, 2018, 01:26 PMHi Shirley – I used the medium size for the heads and the tail. I would cut out the heads from the colorchart and see if it will fit. You might have to put the pocket over the outer edges of the design. All my pockets measured 4.5 or 5 so I thought I was safe with 4.2. Maybe I should make a smaller size next time too.
Suz
