|
|
|
CCQ0307 - Wedge Placemat
CCQ0307 - Wedge Placemat 7x12(180x300mm) or 8x12(200x300mm)
Appliqué Quilt in the hoop panels
Have a round or Oval Table? - Then these are just the perfect placemats for you.
Have fun with decorative fabrics as well as plain fabrics, and also make them reversible.
The completed Wedge Placemat - measures
+- 13.5 inches high x 19 inches wide (35cm x 49cm)
These are all Digital Embroidery Machine Design Files.
You need an embroidery machine to use the design files in this set.
Quilt in the Hoop Placemat
This set is available in (7x12)180x300mm / (8x12)200x300mm
The completed Wedge Placemat - measures - +- 13.5x19inches (+- 35 cm x 49 cm)
You Receive all the necessary panels to make this placemat.
Each panel is provided in 2 Diamond Hatch quilting variations
and 2 Stipple Quilting variations
There are also 2 Bonus "Z" design files in the E Diamond Hatch, that has partial satin edge , so those who wish to, can sew binding along the outside edge of the placemat.
The quilting gets done in the hoop, so any fabric of your choice can be used.
a total of 10 Design Files
A PDF Document is included to assist you.
The designs are provided in DST/EXP/HUS/JEF/PES/VIP and VP3
-(if you need a different format please let me know).
Product questions
-
Sep 15, 2026, 07:09 PM
Is it possible to personalize these by adding embroidery designs and would you stitch out the design prior to or after the quilting?
Sep 15, 2026, 10:06 PMYes, you can personalise the panels by adding any embroidery design that will fit within any one of the panels.
If you are using the stipple quilting, then it would be best to quilt first and then add the embroidery design.
If you use the larger diamond hatch quilting option and you do not mind the quilting lines going across the embroidery design ,
then you can add your embroidery design first, and after that do the quilting.
These plain quilted panels can be used in so many ways, and a lot of it comes down to the preference of the individual user.
